Vehicle fusible link replacement method and precautions

What should I do if the vehicle fusible link is broken?

The cigarette lighter of the car must pass through the fusible link, and generally will not burn other lines. If the fuse of the car cigarette lighter is burned out, you can replace it with a fuse. There is a fuse box inside the driver's position of the car. Find the fuse of the cigarette lighter and replace it with a fuse of the same size.
Here's how to replace the fuse:
1. Open the fuse box, or the car's special storage container for fuses.
2. According to the corresponding table, among many fuses, find the cigarette lighter fuse.
3. Then remove the cigarette lighter fuse, and be careful not to touch other circuit devices.
4. When you remove the cigarette fuse, you will find that the fuse has been blown. Measure the size of the fuse, re-purchase the fuse according to the size, and install it again.

High-Voltage Limt-Gurrent Fuse For Protection Of Electrical Motor

Points to pay attention to when replacing car fuses
Replace the fusible link of the same size
If you use a small current, it will break soon, if you use a large current, then in the event of a short circuit, the fuse will not be easily disconnected, and it is easy to cause a fire. If a new fuse was just plugged in, it would blow immediately. Then there may be a short circuit in the electrical system, which needs to be checked in time. In addition, this phenomenon can also be caused by not closing the corresponding circuit when changing the fuse.

Check-in
Since many optional equipment lines are reserved on the car, there are also many empty positions on the fuse box, and the distance is very close. If the fuse is inserted in the empty position, it cannot protect the circuit;

Doing it yourself is something to be encouraged, but on the premise of ensuring your safety, it is not good if you bury hidden dangers for your safety because of your own mistakes.